Show pageOld revisionsBacklinksExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Progresbar on cp and mv commands ====== <code bash> wget http://ftp.gnu.org/gnu/coreutils/coreutils-8.21.tar.xz tar xvJf coreutils-8.21.tar.xz cd coreutils-8.21/ wget https://raw.githubusercontent.com/atdt/advcpmv/master/advcpmv-0.5-8.21.patch patch -p1 -i advcpmv-0.5-8.21.patch ./configure make </code> You might get the following error, while running “./configure” command. <code> checking whether mknod can create fifo without root privileges... configure: error: in `/home/tecmint/coreutils-8.21': configure: error: you should not run configure as root (set FORCE_UNSAFE_CONFIGURE=1 in environment to bypass this check) See `config.log' for more details </code> Run the following command on the terminal to fix that error and run the “./configure” command again. <code bash>export FORCE_UNSAFE_CONFIGURE=1</code> Compiled files are in src directory linux/misc/cp_mv_progress_bar.txt Last modified: 2019/10/31 09:05by 127.0.0.1