Show pageOld revisionsBacklinksExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Serial2IP - rfc2217 ====== Want to use Mikrotik to communicate with your serial devices? No problem! Mikrotik supports RFC2217. Here is how you set it up: Turn off the serial console: <code> /system console disable 0 </code> Setup serial port: <code> /port setserial0 baud-rate=57600data-bits=8parity=none stop-bits=1 </code> or <code> /port setserial0 baud-rate=auto </code> Test the connection between Mikrotik and the serial device: <code> /system serial-terminal serial0 </code> Forward all traffic from single port (eg. 10000) to serial port (eg. serial0) <code> /port remote-access add port=serial0 protocol=rfc2217 tcp-port=10000 </code> mikrotik/conf/serial2ip.txt Last modified: 2019/10/31 09:05by 127.0.0.1