development:php:cli_cursor

Cursor controll in PHP cli scripts

Controll cursor in CLI scripts by echoing ANSI characters

echo "\033[100D";

Many computer terminals and terminal emulators support colour and cursor control through a system of escape sequences. One such standard is commonly referred to as ANSI Colour. Several terminal specifications are based on the ANSI colour standard, including VT100.

The following is a partial listing of the VT100 control set.

<ESC> represents the ASCII “escape” character, 0x1B. Bracketed tags represent modifiable decimal parameters; eg. {ROW} would be replaced by a row number.

The following codes are used for reporting terminal/display settings, and vary depending on the implementation:

  • Query Device Code <ESC>[c
    • Requests a Report Device Code response from the device.
  • Report Device Code <ESC>[{code}0c
    • Generated by the device in response to Query Device Code request.
  • Query Device Status <ESC>[5n
    • Requests a Report Device Status response from the device.
  • Report Device OK <ESC>[0n
    • Generated by the device in response to a Query Device Status request; indicates that device is functioning correctly.
  • Report Device Failure <ESC>[3n
    • Generated by the device in response to a Query Device Status request; indicates that device is functioning improperly.
  • Query Cursor Position <ESC>[6n
    • Requests a Report Cursor Position response from the device.
  • Report Cursor Position <ESC>[{ROW};{COLUMN}R
    • Generated by the device in response to a Query Cursor Position request; reports current cursor position.

The h and l codes are used for setting terminal/display mode, and vary depending on the implementation. Line Wrap is one of the few setup codes that tend to be used consistently:

  • Reset Device <ESC>c
    • Reset all terminal settings to default.
  • Enable Line Wrap <ESC>[7h
    • Text wraps to next line if longer than the length of the display area.
  • Disable Line Wrap <ESC>[7l
    • Disables line wrapping.

Some terminals support multiple fonts: normal/bold, swiss/italic, etc. There are a variety of special codes for certain terminals; the following are fairly standard:

  • Font Set G0 <ESC>(
    • Set default font.
  • Font Set G1 <ESC>)
    • Set alternate font.
  • Cursor Home <ESC>[{ROW};{COLUMN}H
    • Sets the cursor position where subsequent text will begin. If no row/column parameters are provided (ie. <ESC>[H), the cursor will move to the home position, at the upper left of the screen.
  • Cursor Up <ESC>[{COUNT}A
    • Moves the cursor up by COUNT rows; the default count is 1.
  • Cursor Down <ESC>[{COUNT}B
    • Moves the cursor down by COUNT rows; the default count is 1.
  • Cursor Forward <ESC>[{COUNT}C
    • Moves the cursor forward by COUNT columns; the default count is 1.
  • Cursor Backward <ESC>[{COUNT}D
    • Moves the cursor backward by COUNT columns; the default count is 1.
  • Force Cursor Position <ESC>[{ROW};{COLUMN}f
    • Identical to Cursor Home.
  • Save Cursor <ESC>[s
    • Save current cursor position.
  • Unsave Cursor <ESC>[u
    • Restores cursor position after a Save Cursor.
  • Save Cursor & Attrs <ESC>7
    • Save current cursor position.
  • Restore Cursor & Attrs <ESC>8
    • Restores cursor position after a Save Cursor.
  • Scroll Screen <ESC>[r
    • Enable scrolling for entire display.
  • Scroll Screen <ESC>[{start};{end}r
    • Enable scrolling from row {start} to row {end}.
  • Scroll Down <ESC>D
    • Scroll display down one line.
  • Scroll Up <ESC>M
    • Scroll display up one line.
  • Set Tab <ESC>H
    • Sets a tab at the current position.
  • Clear Tab <ESC>[g
    • Clears tab at the current position.
  • Clear All Tabs <ESC>[3g
    • Clears all tabs.
  • Erase End of Line <ESC>[K
    • Erases from the current cursor position to the end of the current line.
  • Erase Start of Line <ESC>[1K
    • Erases from the current cursor position to the start of the current line.
  • Erase Line <ESC>[2K
    • Erases the entire current line.
  • Erase Down <ESC>[J
    • Erases the screen from the current line down to the bottom of the screen.
  • Erase Up <ESC>[1J
    • Erases the screen from the current line up to the top of the screen.
  • Erase Screen <ESC>[2J
    • Erases the screen with the background colour and moves the cursor to home.

Some terminals support local printing:

  • Print Screen <ESC>[i
    • Print the current screen.
  • Print Line <ESC>[1i
    • Print the current line.
  • Stop Print Log <ESC>[4i
    • Disable log.
  • Start Print Log <ESC>[5i
    • Start log; all received text is echoed to a printer.
  • Set Key Definition <ESC>[{key};“{string}“p
    • Associates a string of text to a keyboard key. {key} indicates the key by its ASCII value in decimal.
  • Set Attribute Mode <ESC>[{attr1};…;{attrn}m
    • Sets multiple display attribute settings. The following lists standard attributes:
  0	Reset all attributes
  1	Bright
  2	Dim
  4	Underscore	
  5	Blink
  7	Reverse
  8	Hidden
  	Foreground Colours
  30	Black
  31	Red
  32	Green
  33	Yellow
  34	Blue
  35	Magenta
  36	Cyan
  37	White
  	Background Colours
  40	Black
  41	Red
  42	Green
  43	Yellow
  44	Blue
  45	Magenta
  46	Cyan
  47	White
Enter your comment:
4 +12 = 
 
  • development/php/cli_cursor.txt
  • Last modified: 2019/10/31 09:04
  • by 127.0.0.1