Show pageOld revisionsBacklinksExport to PDFBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== NIC Teaming and VLAN tag ====== Create virtual switch <code powershell>New-VMSwitch -Name "SETSwitch" -AllowManagementOS $false -NetAdapterName "Eth1","Eth2" -EnableEmbeddedTeaming $true</code> Create virtual adapter, connected to newly created switch <code powershell>Add-VMNetworkAdapter -ManagementOS -SwitchName "SETSwitch" -Name "Management"</code> Set VLAN tag to newly created adapter <code powershell> # Get adapter into variable $NIC1 = Get-VMNetworkAdapter -Name "Management" -ManagementOS # Set tag (to desired value) Set-VMNetworkAdapterVlan -VMNetworkAdapter $NIC1 -Access -VlanId 121 </code> Set adapter IP address, and you're good to go windows/powershell_commands/nic_teaming.txt Last modified: 2019/10/31 09:06by 127.0.0.1