Eureka Moment Wiki

One eureka moment at the time

User Tools

Site Tools


Serial2IP - rfc2217

Want to use Mikrotik to communicate with your serial devices? No problem! Mikrotik supports RFC2217. Here is how you set it up:

Turn off the serial console:

/system console disable 0

Setup serial port:

/port setserial0 baud-rate=57600data-bits=8parity=none stop-bits=1[]code[]


/port setserial0 baud-rate=auto

Test the connection between Mikrotik and the serial device:

/system serial-terminal serial0

Forward all traffic from single port (eg. 10000) to serial port (eg. serial0)

/port remote-access add port=serial0 protocol=rfc2217 tcp-port=10000
mikrotik/conf/serial2ip.txt · Last modified: 2017/12/12 09:31 by tplecko